Upgrade your lighting game with the advanced LED light: compact design, maximum power
The G8 is designed for quick and direct installation on the magnetic matrix of smartphone devices with Magsafe.
– For installation on devices without matrix or magnetic field reinforcement, you can install the ring* provided (optional), removing the rear film and attach it directly on the device or even on protective covers; NOTE: The device size and alignment of the support should be considered, keeping the negative for the filter aligned with the phone camera.
– To promote better grip between the support and the device, the supplied anti-slip rubber* film (optional) can be installed by removing the film from the back and aligning the adhesive part with the support.
– The 55mm filters should be assembled on the top of the support until it is fixed.
– Turn on the light of the LED adapter before attach to the support.
– Attach the LED adapter in the center of the support and ensure that the magnetic fixation is correct.
– LED autonomy: 1h30 on the maximum power.
* They will not adhere to rubber, matte glass, silicon, TPU or soft touch Coatings.
Function of the LED
- 1st function (1 click): 40% white light
- 2nd function (1 click): 80% white light
- 3rd function (1 click and press): 100% white light
- 4th function (3 clicks): turn off.
*For safety reasons, there are two click without lighting before switching off.
Dimensions: 123 x 63 x 21 mm
Material: Anodised aluminium
Adapter for Ø55mm photographic filters
Light source: 6W cob lamp bead
Power supply: 650 Ma - rechargeable battery - USB-C*
Function mode: white light 40% - 80% - 100%
Anti-slip adhesive rubber
Adhesive magnetic reinforcement
*When charging, the indicator light shows red and turns green when fully charged
When the light is on, do not look directly at the light of cob
It is not a toy. For children under 6 years old, use it under the supervision of adults